Institutional Grade Disinfectant Granules

Simple. Effective. Reliable disinfection.
≥68% Available Chlorine
↓ Product Documents Contact & Order
About the product

Reliable disinfection, in a simple granule

MediPro Shield is a chlorine-based disinfectant granule for institutional surface and floor disinfection in hospitals and healthcare premises. Free-flowing granules dissolve quickly in clean water to deliver consistent, high-strength chlorine disinfection — without the bulk and short shelf life of ready-to-use liquids.

Cl

High chlorine strength

≥68% available chlorine for dependable, fast-acting disinfection.

Easy, consistent dosing

Pre-set rates per 10 L — clear, repeatable, no guesswork.

Stable granular form

Long shelf life and compact, easy storage versus liquids.

Cost-effective

Economical to ship, store and use compared with liquid disinfectants.

Certified standard

Produced by an NSF/ANSI/CAN 60–certified manufacturer.

Where to use it

Built for high-risk healthcare environments

Floors & environmental surfaces Toilets & drainage areas Blood & body-fluid spill areas High-risk environmental surfaces

Use limitation: For institutional and surface disinfection use only. Not intended for direct human application, patient care, or medical-device disinfection.

How to use

Standard surface-disinfection dilution

Dissolve MediPro Shield granules in clean water at the rate shown, and stir until fully dissolved before use.

ApplicationDose / 10 LAvail. chlorineContact
Routine floors & environmental surfaces7.5 g~510 ppm10 min
High-risk / high-touch surfaces15 g~1,020 ppm10 min
Blood & body-fluid spills75 g~5,100 ppm10 min

Keep surfaces visibly wet for the full 10-minute contact time. Concentrations align with CDC healthcare benchmarks (routine ~500 ppm; spills ~5,000 ppm). Prepare fresh solution before each use; use within 24 hours.

Measure granules

Use a measuring scoop for accurate dosing.

Add to clean water

Use the rate for your application.

Stir to dissolve

Mix until fully dissolved.

Apply to surface

Cover the area evenly.

Let stand 10 min

Then remove and clean.

Technical data

Specifications at a glance

Chemical nameCalcium Hypochlorite — Ca(OCl)₂
AppearanceWhite granular solid
Available chlorine≥ 68% w/w
Calcium hypochlorite≥ 70% w/w
pH (5% solution)10.5 – 11
Water solubility21 g / 100 mL @ 25°C
Shelf life12 months from manufacture
Available pack sizes1 kg · 5 kg · 15 kg · 25 kg
Product documents

Download product documents

Tap any document below to open or download the PDF.

DOC
Product BrochureOverview & key benefits
DOSE
Dosing ChartDilution rates by application
TDS
Technical Data SheetComposition & specifications
SDS
Safety Data SheetFull handling & safety
Stay safe

Safety & first aid

⚠ DANGER — Keep out of reach of children

Oxidiser. Harmful if swallowed or inhaled. Causes severe skin burns and eye damage. Very toxic to aquatic life. Contact with acids releases toxic chlorine gas.

Read all precautionary and first-aid statements on the label, and refer to the Safety Data Sheet (SDS) before use.

Get in touch

Contact & ordering

Manufactured by

Jal Aqua International Limited
Plot No. 620, Road No. 6, Beside PETL, GIDC, Panoli, Ankleshwar, Gujarat – 394115, India.
An NSF/ANSI/CAN 60–certified company.

Marketed by

Shri Ram Exports
UG, 14 to 22, Sargam Complex, Opp. Bhulka Bhavan, Surat – 395009, Gujarat, India.

Contact

📞 +91 96624 81009
✉️ tarang@jalaquainternational.com
🌐 www.jalaquainternational.com